Taper Burr, For Soft Metals 3/8" x 1", 14 Deg., 1/4" Shaft
ITEM No.
5480-SL3NF
DESCRIPTION
- Application:: Every double-cut Tungsten Carbide Burr is torque tested for strength and accuracy during its production. • Rapid Freehand Stock Removal• Weld Preparation Areas• Less chatter smooth finish on metals, plastics, cast and more• Highly durable tooth design provides clean and even cut right to the tip of the burrGeneral Usage Guidelines1. Use the correct speed to minimize tooth loading and ensure longer tooth life.2. Apply constant movement and light pressure. Unlike common burrs, GARDs burrs do not require heavy manual pressure, this could actually damage the burr3. Prolonged usage may cause over-heating and operator fatigue.
FEATURES
- Head Diamter 3/8"
- Head Length 1"
- Shank Diamter 1/4"
Every double-cut Tungsten Carbide Burr is torque tested for strength and accuracy during its production.
• Rapid Freehand Stock Removal
• Weld Preparation Areas
• Less chatter smooth finish on metals, plastics, cast and more
• Highly durable tooth design provides clean and even cut right to the tip of the burr
General Usage Guidelines
1. Use the correct speed to minimize tooth loading and ensure longer tooth life.
2. Apply constant movement and light pressure. Unlike common burrs, GARDs burrs do not require heavy manual pressure, this could actually damage the burr
3. Prolonged usage may cause over-heating and operator fatigue.
