DESCRIPTION
GARDSERT1-1/2 -8
- Self-Tapping
- Self-Cutting
- Self-Locking
- Won't Pull Out
- Won't Wear Out
- Note:: Because the hole size is larger than 2 inches, the customer is responsible for the method by which to achieve the holes. For this reason, GARD Specialists only provides the specifications and tolerances to which the holes are to be bored. If further assistance is required, please contact Technical Assistance at 1-800-541-9301
- Note (2):: For very large GARDSERTS, a special socket is required instead of the usual cap screw and nut
- Requirement: Gard Deluxe Tapping Fluid ( Part No. 5906-DTF-8) is REQUIRED for installation of all large Gardserts
- Requirement (2): Be sure to use high-strength cap screw for installation
FEATURES
- Wall Standard
- Installation Tool 200M-2408T
- Internal Thread Size and Thread Pitch 1 1/2"-8
- Outside Diamter (Inches) 2.25
- Pilot Hole Size & Drill Part No. 2-3/16 +.010/-.000
- Length(In Inches) 2.126
- Material Stainless Steel
- External Diamterer and Threads Per Inch 2 1/4"
